Several effects of stainless steel sheet metal processing
Modern stainless steel sheet metal processing
decorative art of surface coloring on the main effect of several detailed, often
in the process of practice will get unexpected results.
Surface polishing,
stainless steel sheet metal surface polishing method to grind the materials by
mechanical or manual. Surface polishing and polishing, mirror, mercerization,
blasting effect. According to the different effect of surface, the use of tools
and methods are not the same. Polishing tool is stuck with abrasive abrasive
cloth, sandpaper, magic of nimbus, belt grinding, grinding wheel, and so on.
Blade grinding, numerous abrasive particles quite in a myriad of hardness is
very high, on the surface of the stainless steel sheet metal processing were
cutting, so as to achieve the purpose of smooth.
Mirror atmosphere of the
effect of pre polishing and fine polishing and pre polishing using hard or
harder polishing wheel after polished stainless steel sheet metal processing and
surface treatment process, it can grinding surface of coarse traces out. Fine
polishing using the soft of pre polishing surface for further processing, remove
the traces left by the pre polishing, mirror bright.
Mercerizing effect, is
installed in the grinding and polishing machine brush nimbus, on the surface of
the stainless steel sheet metal processing for processing decorative wire lines
and satin light brush surface modification effect.
Effect of sandblasting,
using compressed air will flow sand or steel pill, glass beads and other
abrasive jet on the surface of stainless steel sheet metal processing, making it
appear to were beautiful, slightly rough sandy surfaces.
Surface etching and
etching is the use of chemical acid corrosion and get a mottled, the
vicissitudes of the decorative effect. The specific methods are as follows:
first in stainless steel sheet metal processing surface coated with a layer of
asphalt. Then the design patterns in the characterization of the surface of the
asphalt will be part of the corrosion of stainless steel sheet metal processing
exposed. Here you can corrosion, corrosion can be considered works of size,
select chemical acid solution immersion corrosion and spray brush solution
corrosion. Generally speaking, the small selection of immersion corrosion.
Chemical acid has a strong corrosive, erosion operation must pay attention to
security.
Surface mounted technology, has a long history. It includes block
stone and inlaid with two processes. Here rendered the gold inlaid process, also
known as gold and silver on the wrong, it first in stainless steel sheet metal
processing surface characterizations of Yin pattern, embedded filigree or gold
and silver pieces and the texture is soft stainless steel sheet metal processing
materials, and then polished smooth. The effect is very tiny
gorgeous.
Surface forging, also by the ancient forging process development
and. It is using different shapes of the hammer on the surface of the stainless
steel sheet metal processing of forging, resulting in the formation of different
shapes of the dot texture, layer upon layer, very has the
decoration.
- 上一篇:On the development and future 2016/8/1
- 下一篇:How to reduce the bending mach 2016/7/13